Blue Cat Audio Support Center Knowledgebase
Connector / Fader Hub
Suggested knowledgebase articles:

Knowledgebase Connector / Fader Hub

Articles in this category

Connector / Fader Hub sender instance can connect, but receiver keeps saying "NOT CONNECTED"

When the sender can display the name of the receiver, the connection is fine. If the receiver instance still displays "NOT CONNECTED", it means that the host application is not streaming any audio or ...
Is it possible to achieve low latency streaming between two DAWs / audio applications?

You should definitely be able to achieve very low latencies between to instances of Connector in different audio apps, even over the network. It just needs a bit of tweaking regarding the receiving bu...
How to Send/Receive MIDI with Connector?

While there is no such thing as a MIDI plug-in in most DAWs (except for Logic), you can actually route MIDI events thru plug-ins in most of them. To send MIDI thru Connector, you simply need to insert...
How to record audio received by Connector in my DAW?

Blue Cat's Connector is plug-in, and in most DAWs, plug-ins are inserted after track playback/recording in the audio chain. So while you can hear the audio output of Connector, it won't be recorded on...
Cannot receive MIDI events thru Connector in Ableton Live

In order to receive MIDI events via connector in Ableton Live, you have setup Live to route events f
Can I synchronize two DAWs (tempo, start/stop...) with Connector?

Unfortunately, Connector cannot synchronize host applications as plug-ins do not have any way to control the host's tempo or transport. If you want to play MIDI sequences or apply effects in sync in b...
Network Connection Troubleshooting Guide

If you are trying to connect two applications thru the network, you may have connection issues for multiple reasons. Here is a quick summary of what you should check to troubleshoot connection issues ...
Audio is stuttering when connecting thru the network

If both machines are connected but audio is stuttering (and the connection name is flickering in the receiver), simply increase the "buffering" parameter in the receiver instance until there is no stu...